FS: Solid 3D printed Nylon 016 shifter bushings
Posted: Sun May 24, 2020 2:14 pm
Solid 3D printed Nylon 016 shifter bushings (replace Audi p/n 431711221). Firm up the shifter feel and won't disintegrate in a tank of gas like other replacement options.
I've been running this on my UrQ for the last 5k miles and it's been great! Much more durable and heat resistant than printing out of PLA or ABS. Recommend installing with a dab of grease on the inside of the cup.
$30 shipped for 1 within USA
+$20 for additional ones if you want more than one
Message me for international requests.
I have 10 made in an initial batch, can make more if there is a demand.
All credit to Steven for the original design. Just helping those that don't have 3D printers or ones that can print Nylon. https://www.thingiverse.com/thing:2558263
DIY instructions: https://drive.google.com/file/d/1hso8Gz ... sp=sharing
96025410_10113667721972538_2231471303976550400_o by Vex Art Media, on Flickr
I've been running this on my UrQ for the last 5k miles and it's been great! Much more durable and heat resistant than printing out of PLA or ABS. Recommend installing with a dab of grease on the inside of the cup.
$30 shipped for 1 within USA
+$20 for additional ones if you want more than one
Message me for international requests.
I have 10 made in an initial batch, can make more if there is a demand.
All credit to Steven for the original design. Just helping those that don't have 3D printers or ones that can print Nylon. https://www.thingiverse.com/thing:2558263
DIY instructions: https://drive.google.com/file/d/1hso8Gz ... sp=sharing
96025410_10113667721972538_2231471303976550400_o by Vex Art Media, on Flickr