Page 1 of 1

1986 Coupe GT & 4000 Part Out

Posted: Fri Aug 17, 2018 11:54 am
by vt10vt
I'm going to be putting together a more detailed list, but figured I'd toss up the bare bones facts and give you guys first shot at stuff. Partially parting out two cars; one is a 1986 auto CGT and the other is a 4000cs shell. Quite a bit is not available due to these both being "projects" but still some good parts available.

1986 Coupe GT
20180407_122955.jpg
20180407_122955.jpg (1.32 MiB) Viewed 23190 times
20180407_123006.jpg
20180407_123006.jpg (2.08 MiB) Viewed 23190 times
GOOD PARTS:
Full black carpet set
Headliner
Uncracked black dash (I may keep this, but open to offers)
Digi dash (currently inop, willing to sell cheap as-is or I'll look at fixing it)
Power steering pump belt cover (DID YOU EVEN KNOW THIS WAS A THING?!?!)
Complete CIS system INCLUDING injector hold down bracket :o (car ran well, I drove it an hour home)
Most of the interior trim
Front Bumper
Rear Bumper (kinda rough
Good NG cylinder head
Auto trans (LOL)
Tons of little stuff- this car was remarkably complete, if you're building a concours level 4k/urq/cgt I probably have a bunch of stuff you're missing)

NOT AVAILABLE:
Body wiring harness
Window/door seals
Doors/mirrors/windows
Body panels
Engine block

JUNK:
Seats
Door Cards
Door Trim
Engine Wiring Harness
Headlights

1986 4000cs
20180814_200543.jpg
20180814_200543.jpg (880.94 KiB) Viewed 23190 times
AVAILABLE
Misc sheet metal
Sunroof assembly
Trunk
Rear doors
Front door glass (not doors)

NOT AVAILABLE:
Subframes
Rear Diff

MISSING:
Complete interior
Axles
Driveshaft
Rear Glass

Let me know what you guys need, prices are pretty much best offer, and if you need any bigger stuff I'll be headed down to the Maryland area 2nd weekend in September so delivery/meet up would be an option along that route.

Thanks!

-Shawn

Re: 1986 Coupe GT & 4000 Part Out

Posted: Sat Aug 18, 2018 3:41 pm
by PRY4SNO
By missing driveshaft I take it you mean propshaft, and not the drive axles? If the propshaft is in fact available, I'm interested.

Re: 1986 Coupe GT & 4000 Part Out

Posted: Sat Aug 18, 2018 11:22 pm
by vt10vt
PRY4SNO wrote:By missing driveshaft I take it you mean propshaft, and not the drive axles? If the propshaft is in fact available, I'm interested.
Every shaft is missing or being kept. But yeah, prop shaft/driveshaft didn't come with the shell, neither did front axles, and I honestly couldn't even tell you if there's rear axles in it... but if there are I'm keeping them haha

Re: 1986 Coupe GT & 4000 Part Out

Posted: Sun Aug 19, 2018 11:34 am
by AudiSport4000
PM sent

Re: 1986 Coupe GT & 4000 Part Out

Posted: Sun Aug 19, 2018 11:05 pm
by Quattro v1.0
Fuse box?

Re: 1986 Coupe GT & 4000 Part Out

Posted: Mon Aug 20, 2018 10:29 am
by vt10vt
Quattro v1.0 wrote:Fuse box?
I have one from the 4k but I'll most likely be keeping the CGT one. PM me if you're interested.

Re: 1986 Coupe GT & 4000 Part Out

Posted: Tue Sep 25, 2018 10:23 pm
by waxio
Front bumper?? With grills and lights?

Re: 1986 Coupe GT & 4000 Part Out

Posted: Fri Oct 05, 2018 7:40 pm
by highlander69
Back half of coupe gt?

Minus trunk lid, spoiler, axle, wheels, suspension

Thanks

Re: 1986 Coupe GT & 4000 Part Out

Posted: Sat Oct 06, 2018 8:51 am
by vt10vt
highlander69 wrote:Back half of coupe gt?

Minus trunk lid, spoiler, axle, wheels, suspension

Thanks
Keeping those parts... for something :D

Sorry Craig!

Re: 1986 Coupe GT & 4000 Part Out

Posted: Tue Oct 09, 2018 5:41 pm
by highlander69
No problem.

Good luck with your project.

Cheers