Page 1 of 2
Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Sat Mar 21, 2015 12:10 am
by AngryTaco
I will have the pre-order price sometime Monday or Tuesday after my poly manufacturer gets back to me with quote information. I made a few prototypes for customers (including Greene on here) and they are very nice.
As you will see in the pictures, I designed these to be used with the factory inner sleeve. I did this in order to retain wall thickness and maintain the overall integrity of the housing (think cracked housings due to 03junk)
Removal of the factory rubber crap is relatively easy with a torch. Just be sure to do it outside. Be sure to clean the sleeve well and remove all the old rubber. DO NOT MELT OR REMOVE THE INNER SLEEVE
This is the end all be all problem solver for your clunking rear dif!!!
Retail Price: $65
Pre-order price: $55 + free shipping
Looking for 10-12 orders total to help offset the mold costs.
Signed Up:
Steve B (FB-P - S) -- 1x
JD L (FB-P - S) -- 1x
Scubagli (P) --1x
Tom R (FB-P - S) -- 1x
Jim Greene (P - S) -- 1x
Jetstream (P) -- 1x
Dana (P - S) -- 1x
Dan W (T) --1x
Namreg (P -shipped 1 owed 1) -- 2
Peters (P - S) -- 2x
FFF (P - S) --1x
MDriggs (FB - P - S) -- 2x
--------------------
Total (P): 15x
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Sun Mar 22, 2015 7:21 am
by Peters
Jared, don't you mean the outer sleeve that is presses into the housing? the inner sleeve would go around the mounting bolt through the middle of the bushing
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Sun Mar 22, 2015 12:12 pm
by AngryTaco
Peters wrote:Jared, don't you mean the outer sleeve that is presses into the housing? the inner sleeve would go around the mounting bolt through the middle of the bushing
Correct. When I say inner sleeve, I'm referencing to the housing only with no bushing installed. With the bushing installed, it would be considered the outer sleeve. Either way, dont remove it lol
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Sun Mar 22, 2015 12:22 pm
by ringbearer
Why did you choose to leave it in?
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Sun Mar 22, 2015 12:33 pm
by AngryTaco
edit
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Sun Mar 22, 2015 12:34 pm
by AngryTaco
AngryTaco wrote:
As you will see in the pictures, I designed these to be used with the factory inner sleeve. I did this in order to retain wall thickness and maintain the overall integrity of the housing (think cracked housings due to 03junk)
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Sun Mar 22, 2015 2:31 pm
by ringbearer
Ah, gots it now.
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Mon Mar 30, 2015 10:16 am
by AngryTaco
Supplier got back to me.
Retail price is $60 + shipping.
Pre-order Price is $55 + free shipping.
Going to pull trigger on mold in a week or so.
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Fri Apr 03, 2015 10:27 am
by AngryTaco
Pulling the trigger on this on Monday everyone.
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Fri Apr 03, 2015 10:37 am
by dana
i'd be down for one of these for $55. paypal is
motormaniac2@aol.com if you want to send me an invoice.
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Fri Apr 03, 2015 11:18 am
by AngryTaco
Invoice sent!
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Fri Apr 03, 2015 11:39 am
by dana
paid, thanks.
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Sat Apr 04, 2015 5:36 am
by scubagli
Paid.
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Mon Apr 13, 2015 7:43 am
by dana
when might these be shipping?
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Tue Apr 14, 2015 4:46 pm
by AngryTaco
The mold is still currently being made, so good possibility end of the month.
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Thu May 07, 2015 7:03 pm
by AngryTaco
mold is just about done so everyone should start seeing their parts in 2-3 weeks!
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Thu May 07, 2015 7:17 pm
by audifreakjim
Fuck. I better finish my car
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Thu May 07, 2015 8:45 pm
by AngryTaco
Wait so if I dont get these to Jim in time for BBQ and I show up with a 20v....does that mean my 20v is faster than a built 07k?
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Fri May 08, 2015 2:10 am
by PRY4SNO
Why are you allowed to post 20v again?
We had a good thing going...
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Fri May 08, 2015 9:18 am
by Peters
so if I need to order a pair now, retail price?
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Fri May 08, 2015 11:37 am
by AngryTaco
I'll still give you the pre-order price. Anything helps that will offset the inital mold costs
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Fri May 08, 2015 11:38 am
by AngryTaco
PRY4SNO wrote:Why are you allowed to post 20v again?
We had a good thing going...
Because only YOU guys see 20v. I see 20v
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Fri May 08, 2015 3:04 pm
by dalspaugh
I didn't realize there were was a thread for this, you know I'm in!
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Tue Jun 16, 2015 10:53 pm
by AngryTaco
The first prototypes arrived today. Placing the bulk order tomorrow and getting everyone's!!!!!!!!
Re: Small Chassis Rear Dif Center Bushing Mount -- Pre-order
Posted: Fri Jun 19, 2015 10:05 pm
by FFF
Is it too late to get in on the order?
fbatwork@gmail.com for invoice if I am not