FS: $4,500 Casey's 200 20v

WOMBAT · Post by **WOMBAT** » Mon Aug 06, 2007 6:00 pm

Big thanks to gidrew for the help and garage space to put in the H&R's a couple weeks ago. Figured it was time to start documenting the very slow progress of my car to....who knows!

Attachment ( 8767 ) : HnR drivers side.JPG

Attachment ( 8766 ) : HnR front.JPG

Attachment ( 8765 ) : HnR rear.JPG

yodasfro · Post by **yodasfro** » Mon Aug 06, 2007 6:30 pm

Could use some euro headlights and v8 tails .

WOMBAT · Post by **WOMBAT** » Mon Aug 06, 2007 6:33 pm

mm yes lights - thinking about bixenon projectors within those crappy DOT buckets....and im back and forth on the V8 tails...time will tell!!

i'd like the front end to be little lower too

WOMBAT · Post by **WOMBAT** » Sun Nov 11, 2007 12:48 am

Here's what we've got!

-K&N drop-in
-Chipped (unknown, assume 275ish)
-Center resonator delete

pulled 3 times with very consistent results.

Before pulling the car into the shop, the owner came out and said, "wow that's old school" and was loving every bit of it "is that the stock paint?" etc. Then while driving it out said "this thing's great, it's like a limo"

....haha fat bottomed audis you make the rockin' world go round

I also ran with about 10 guys from school, a few of which were duramax chevy's.....

I have some vids i'll upload of the soot, but for number's sake, he spun his tires on the mustang dyno and put out 650whp and 1040ft/lbs :bashtard:

Attachment ( 9732 ) : dyno 1.jpg

Attachment ( 9731 ) : dyno 1 plot.jpg

WOMBAT · Post by **WOMBAT** » Sun Nov 11, 2007 12:57 am

Just for the sake of keeping things together....here's the link to the "V8" tails
http://www.motorgeek.com/phpBB2/viewtop ... ight=tails

oldsklaudidub · Post by **oldsklaudidub** » Sun Nov 11, 2007 9:58 am

nice runs.

Twice the Audi? what were you saying?

:bump:

3B'dB3 · Post by **3B'dB3** » Wed Nov 14, 2007 4:20 pm

Wheres the big turbo casey? :-D

WOMBAT · Post by **WOMBAT** » Wed Nov 14, 2007 5:05 pm

sitting pretty next to me on a shelf :roll:

WOMBAT · Post by **WOMBAT** » Thu Mar 06, 2008 2:39 pm

Nothing much since the dyno run, but I managed to make some smoked signals, install a boost gauge, and make the exhaust sound a bit more pronounced.

Attachment ( 10698 ) : smoked signal.jpg

Attachment ( 10697 ) : smoked signal close.jpg

Attachment ( 10696 ) : tailpipe.jpg

Attachment ( 10695 ) : boostgauge.jpg

3B'dB3 · Post by **3B'dB3** » Thu Mar 06, 2008 3:39 pm

nice placement of the gauge, I cant wait to see what happens with more funds... :-)

WOMBAT · Post by **WOMBAT** » Thu Mar 06, 2008 4:03 pm

:stupid: :-D

kingof20v · Post by **kingof20v** » Fri Mar 07, 2008 12:58 am

i'm waiting for the snail, see what the u-boat can really do

WOMBAT · Post by **WOMBAT** » Sun Jun 15, 2008 6:16 pm

Here's what I accomplished this past weekend, it works great!! any suggestions on how to upgrade the rear brakes? bias is a little off now :bashtard:

Attachment ( 12290 ) : DSC_0002.JPG

Attachment ( 12289 ) : SNC12833crop.jpg

Attachment ( 12288 ) : SNC12841crop.jpg

oldsklaudidub · Post by **oldsklaudidub** » Sun Jun 15, 2008 6:33 pm

looks great Casey :bump:

btw, the bet is still on :bang:

WOMBAT · Post by **WOMBAT** » Sun Jun 15, 2008 6:36 pm

i'll be in arlington, oregon.... :( workin' for the man now

oldsklaudidub · Post by **oldsklaudidub** » Sun Jun 15, 2008 6:39 pm

Working for "the man"?

WOMBAT · Post by **WOMBAT** » Sun Jun 15, 2008 6:42 pm

haha, on salary now. I'll be working in arlington for 4 weeks at a time, then home for a week for july and august, so it's lookin' like I won't be on the right coast for waterfest :x

oldsklaudidub · Post by **oldsklaudidub** » Sun Jun 15, 2008 6:50 pm

oh I forgot to tell you, looks liek Waterfest is a no go for me unless I start getting phone calls.

Thats why I was egging you on about Carlisle, its much better than Waterfest in my opinion.

Chad T · Post by **Chad T** » Sun Jun 15, 2008 7:32 pm

Wow nice!! Really fills up those 19s. :thumbsup:

derracuda · Post by **derracuda** » Sun Jun 15, 2008 8:41 pm

arlington!, i just looked it up, that's about 2.5-3 hours from me. maybe sometime we can meet up in portland 8) meet up with matt and some other p-town audi nerds? how many trips will you be making out here?

WOMBAT · Post by **WOMBAT** » Mon Jun 16, 2008 3:09 am

i should be there from july 6th through the end of august with a week or 2 of vaca which will probably be back in vt. I think food and drink are certainly in order!

death 4kqt · Post by **death 4kqt** » Mon Jun 16, 2008 4:32 am

Damn casey, now them is some brakes! I like how you are wearing a seemingly nice shirt and pants whilst installing brakes. Gotta keep up the style.

WOMBAT · Post by **WOMBAT** » Mon Jun 16, 2008 6:08 am

hahaha they're pretty worn out, you can't see the holes in the front of the shirt 8)

oldsklaudidub · Post by **oldsklaudidub** » Mon Jun 16, 2008 6:13 am

Casey, is the new turbo still sitting in the box?

WOMBAT · Post by **WOMBAT** » Mon Jun 16, 2008 6:17 am

sitting in my shed at my house, in need of a new shaft :x kind of bent

FS: $4,500 Casey's 200 20v

FS: $4,500 Casey's 200 20v

Went to the dyno yesterday....

A little update...nothing much