Page 15 of 55
Re: Darin's 80tq...01E!!!!!....
Posted: Thu Jun 07, 2012 11:44 pm
by scubadave
Looks like you have a full weekend ahead of you. I'll try to break away if I can and give you a hand if only for a few hrs. Don't fret if it doesn't happen, obviously hank is the first choice since he has had his hands all over your car junk, but if you run into problems and can't get to it by then, I have a few other friends that can tig. We'll get er done one way or another. Steve has my downpipe right now as I have been fixing my exhaust leak. I diddnt feel I needed to overwhelm hank when he has so much on his plate already.
Re: Darin's 80tq...Hank?!....
Posted: Fri Jun 08, 2012 3:40 pm
by Audilard
:frustrated: :frustrated: :frustrated: :frustrated: :frustrated: :frustrated: :frustrated:
Re: Darin's 80tq...Hank?!....
Posted: Fri Jun 08, 2012 3:43 pm
by Audilard
:frustrated: :frustrated: :frustrated: :frustrated: :frustrated:
Wasted morning. Wasted progress.
Re: Darin's 80tq...Hank?!....
Posted: Fri Jun 08, 2012 3:52 pm
by nm_audi
^
Hank withdrawal in progress!
Re: Darin's 80tq...Hank?!....
Posted: Fri Jun 08, 2012 5:01 pm
by PRA4WX
I'll give ya $1500 for it as it sits!
Darin's 80tq...Hank?!....
Posted: Fri Jun 08, 2012 5:17 pm
by Mcstiff
:stupid:

keep at it!
Re: Darin's 80tq...Hank?!....
Posted: Fri Jun 08, 2012 6:00 pm
by Audilard
Was making good progress. Tranny in, drive shaft in, axles on, block in and then Hank called. He gave me the wrong transmission. I have the broken one. :frustrated:
Re: Darin's 80tq...Hank?!....
Posted: Fri Jun 08, 2012 6:31 pm
by EDIGREG
Lol ouch...that sucks
Re: Darin's 80tq...Hank?!....
Posted: Fri Jun 08, 2012 7:21 pm
by 85oceanic
DUDE! That sucks.
Re: Darin's 80tq...Hank?!....
Posted: Fri Jun 08, 2012 7:27 pm
by 40v4kq
Dont worry, its an Audi, its supposed to be broken :slap:
Re: Darin's 80tq...Hank?!....
Posted: Fri Jun 08, 2012 7:50 pm
by quattro87
Oh bummer. Pretty much all of your work has to come out then. Do you have to pull the good 01e out of Hank's car before you can install it in yours? :wink: Were you planning on Pike Peak Darin?
Re: Darin's 80tq...Hank?!....
Posted: Fri Jun 08, 2012 8:08 pm
by Audilard
I don't know which tranny I get now. I'm hoping to pick it up tomorrow.
Re: Darin's 80tq...Hank?!....
Posted: Sat Jun 09, 2012 12:42 am
by Hank
Darin, while I am sorry for the trans mix up, calm down man! There are usually hangups. My car was running at 7pm and now is back to the head pulled on the bench with the oil pan off! Part of playing with high up audis!
Re: Darin's 80tq...Calmed down...
Posted: Sat Jun 09, 2012 5:34 am
by Audilard
Oh I am. Like I said, it's better this way. It was too big of a rush to get it done and that would lead to more problems. As always, you've helped a ton Hank, so no big deal. I was just trying to delay your departure. :-)
Re: Darin's 80tq...Calmed down...
Posted: Sat Jun 09, 2012 8:44 am
by PRA4WX
Audilard wrote:Oh I am. Like I said, it's better this way. It was too big of a rush to get it done and that would lead to more problems. As always, you've helped a ton Hank, so no big deal. I was just trying to delay your departure. :-)
So.......how does this affect the chances of my purchase of the car.....

:slap:
Get it back together and driving again! 8)
Re: Darin's 80tq...Calmed down...
Posted: Sat Jun 09, 2012 10:43 am
by 85oceanic
Gotta love Audi drama

Re: Darin's 80tq...Calmed down...
Posted: Mon Jun 11, 2012 6:46 am
by a_CQ
L O L...I literally laughed out loud when I read it...sorry boys.
Re: Darin's 80tq...Calmed down...
Posted: Mon Jun 11, 2012 7:34 am
by audifreakjim
I think Battle Born is going to take on a whole new meaning this year

Darin, just don't sell your car before then!
Re: Darin's 80tq...Calmed down...
Posted: Mon Jun 11, 2012 7:53 am
by Audilard
On Saturday I went down to Hank's and picked up the other transmission. Hank had quite the weekend. Between my transmission mix-up, his engine, and a shipping problem, he was having a rough go.
We discussed in length the current transmission in my car. When he bought it, the previous owner seemed to think something was wrong with it and swapped transmissions. When he got the new on in, it had the same problem as the old one. Something was done to the linkage and the new transmission worked so Hank is, and I quote, 80% confident the transmission is good. I can shift into all the gears so it's possible it could be.
So, the plan is the put the car together and try it. If it works, great, if not, then it's removing it the harder way. Worth a go.
Re: Darin's 80tq......
Posted: Mon Jun 11, 2012 9:18 am
by savagerocco
Well, if it is bad, I can help you rebuild it. I've been in to several audi transmissions.....
Re: Darin's 80tq......
Posted: Mon Jun 11, 2012 9:24 am
by Hank
Brent, is the transmission out of your CQ right now?
Re: Darin's 80tq......
Posted: Mon Jun 11, 2012 1:05 pm
by Buckets
I chuckled. Sorry. Weve all been there, or similiar. Head up, Keep going.
Re: Darin's 80tq......
Posted: Mon Jun 11, 2012 1:20 pm
by savagerocco
the motor and trans are still in the car, but they are coming out very soon.
Re: Darin's 80tq...slowly...
Posted: Sun Jul 01, 2012 3:35 pm
by Audilard
The progress is slow, but steady. I'm still not certain the transmission is good since the shift linkage needs to be modified again. I think it's best to cut the linkage, attach to the shift rod, and then weld it back on. It's too picky to do it any other way. The list is long and the time available to work on it is scarce, but I try to do something to it each night. It's been so long I can't remember how some of it went together, namely the power steering pump mounting and the a/c compressor.
It looks good though.

Re: Darin's 80tq...slowly...
Posted: Sun Jul 01, 2012 4:42 pm
by 85oceanic
Dang Darin, that looks freaking fantastic. I wish I had a bunch of Hank's goodness on my AAN!