As you can see in this picture of my 2.5 euro block the bottom oil pressure switch threaded hole is much bigger than the 7a or 3b or aan blocks. Any ideas, leads or suggestions for a larger switch or one I can order?
Euro block oil pressure switch....help
Euro block oil pressure switch....help
As you can see in this picture of my 2.5 euro block the bottom oil pressure switch threaded hole is much bigger than the 7a or 3b or aan blocks. Any ideas, leads or suggestions for a larger switch or one I can order?
Darin
1989 80 20vt
1989 80 20vt
Re: Euro block oil pressure switch....help
The check valve is as that is the same.
Darin
1989 80 20vt
1989 80 20vt
Re: Euro block oil pressure switch....help
You need the adapter 034103179 supersedes to 074103179 common on most I5 blocks.
Last edited by yodasfro on Sat Oct 08, 2016 6:09 pm, edited 1 time in total.
Austin 90' 90q 20v 91' 200 20v wagon 92' urs4
Re: Euro block oil pressure switch....help
http://audi.7zap.com/en/rdw/audi+a6+s6+ ... 103020/#26
#26 in the picture. The adapter is found on many I5 engines.
#26 in the picture. The adapter is found on many I5 engines.
- Attachments
-
- On a 7a Coupe the oil pressure switch is mounted there.
- IMG_1776.JPG (1.85 MiB) Viewed 14918 times
-
- On my S6 I installed an oil line to a remote mounted oil pressure gauge sender.
- IMG_1775.JPG (1.74 MiB) Viewed 14918 times
Nulla tenaci invia est via
Re: Euro block oil pressure switch....help
yodasfro wrote:You need the adapter 034103179 common on most I5 blocks.
Besides a used block. Know where I can get one?
Darin
1989 80 20vt
1989 80 20vt
Re: Euro block oil pressure switch....help
Austin 90' 90q 20v 91' 200 20v wagon 92' urs4