CQ center armrest installed. pic

[fivecylindersoffury]

I'm leaning toward this for my 5k

[pkw]

and crap, I never got that video. I really need some brake work on this scary thing. I am guessing that going for it in first, on up through the gears, that the speedo needle takes VERY close to a second to get from 40 to 60 mph. I would like a vid to confirm this.

[pkw]

SCORE!

Attachment ( 36844 ) : 2013-08-08 15.06.31.jpg

[pkw]

and

Attachment ( 36845 ) : 2013-08-08 18.51.13.jpg

[pkw]

I grabbed the bolt on brackets for the under headlight trim but my b3 has a different set up. what does everyone do to solve the issue?

[Hybrid_Hatch]

use b4 headlights and trim.

[jaesunel]

use b4 headlights and trim.

Which, according to UPS tracking, you should be receiving today.

[pkw]

just got the package 4 minutes ago, with the parts so i can probably open it and figure things out better with the parts in my hands. was working with no trims before and no visual aid.

[VWAudi4Life]

LOL! And I have a red CQ with white B4 hood

[pkw]

I own this bumper:
http://wetzelsracing.com/products.htm
A half ass mold job from a non reinforced bumper cover as a plug saves 2 hours of mold guy's time and cost the bumper purchaser 8 to fix it...times that by how many bumpers are sold.....the mold guy deserves to be kicked in the nuts a lot. :x

Attachment ( 37158 ) : 2013-08-09 12.03.10.jpg


Attachment ( 37159 ) : 2013-08-12 00.26.56.jpg


Attachment ( 37160 ) : 2013-08-25 13.33.01.jpg


Attachment ( 37161 ) : 2013-08-25 17.54.25.jpg

[death 4kqt]

its not nice to kick 5 year old Chinese kids in the nuts.

[Golden91CQ]

death 4kqt wrote:[/quote]

its not nice to kick 5 year old Chinese kids in the nuts.[/quote]
haha thats not a joke tho..

[pkw]

huh? Mine is a Mark Wetzel product. thought it came from the UK or something????
Some place where folks know better?

[death 4kqt]

i was making a joke about everything being shitty and also from china and being made by young kids and kicking in the nuttts..... ah whatever, not the best joke i've ever cracked.

[maverick]

Not to thread jack, but does anyone have any sort of measurement for the rs2 bumper? Basically I want to see if it will cover my intercooler as is or if I'll have to move it up

[90/90qs]

I'm with you on the kicks to the nuts.
I think I've spent 40+ hours on mine and it's still far from acceptable.
-I kept the factory rebar, added a big intercooler, and it's a B3 so I think there wasn't a whole lot of 'bolt on' to begin with.... woulda been nice if I didn't have to deal with warpage issues as well.
Good luck with it, looking good!

[SeStone]

Not to thread jack, but does anyone have any sort of measurement for the rs2 bumper? Basically I want to see if it will cover my intercooler as is or if I'll have to move it up

That is probably too wide to fit within the middle opening. I think mine has a 28" wide core or something, and with 90* couplers on each end tank it just barely fits inside.

Sam

[ur20v]

You bought a knockoff, what do you expect?

[pkw]

death 4kqt wrote:[/quote]

i was making a joke about everything being shitty and also from china and being made by young kids and kicking in the nuttts..... ah whatever, not the best joke i've ever cracked.[/quote] no, it was a pretty ok joke Dana. I just wondered if I was lied to about the place of origin in addition to being sold something that was really bad. Does not matter because with some time I can come out lookin good.

[pkw]

The beauty of the fiberglass is it is highly customizable and no matter how bad it is, it can be fixed. My original plan required it to be something that could be made into whatever I needed it to be as I finalized my build specs. That is the main reason I bought a knock off. Just pisses me off, as a guy that is usually more than happy to donate a few minutes of my time, if it saves someone else wrestling with something for an hour that the mold guy must be the opposite.
I did take the most warped one of the group that was sent to me so others will probably not have as much work into theirs.

[naudi1]

huh? Mine is a Mark Wetzel product. thought it came from the UK or something????
Some place where folks know better?

Mine came from mark also thought it was done on the east coast.

[90/90qs]

-Thanks Peter; you were definitely a gentleman in taking the worst of them, I was in on that group buy.
Ill tell ya though, been sharing the pain seriously.
I'm going to have to consider your method there to straighten mine up, then maybe we can meet up and trade notes

[vt10vt]

So... what's happening with this? It ever make 500hp?

[pkw]

No, not yet and not likely. It probably could make 500chp with e85 but I am not going to run e85 on a 7.5:1 engine. I do expect more to come however. I have a new treadstone intercooler and the car needs a brake upgrade, some bumper shaping, and a paint job. If it were not in the 20s still I would have already been working on it. It is normally around 50 on a nice day by now.

[Alloutofdonuts]

I hear u, this never ending winter is really sucking my frozen balls off. Usually by my birthday the warmer weather is here and the white shit is melting or melted. Really makes it a bish to do ANYTHING on the car, let alone what HAS to be done.