upgraded rear brakes 310 or 330mm

[AudiQuattros]

In general here are the options to save the parking brake.

310mm
pads and caliper native
brake disk 4E0 615 601 K
spacer on the drawing (drawing for Audi S6 \ S4 \ V8 with a nave with a long reach . For Audi 200 thickness 5mm spacers)







330mm
1) pads 4F0 698 451 F
2) wheels Otto Zimmermann100.3358.20
3) bracket right left TRW BDA 604, 605
4) caliper right to left VAG7H0 615424 A, VAG7H0 615 423 A
5) guides for pad VAG3D0 615,231
6) 4 bolts VAGN 911 268 01

[20VAvant]

This is awesome, I will have to put 310mm on the rear of mine!
Thanks for the prints as well!

[ringbearer]

great info, thanks!

[AudiQuattros]

If you have questions, please ask ..

[pilihp2]

Are these the factory 200/v8 rear calipers? I'm struggling with part numbers.

It looks like you can use either the factory caliper or the ones that are shown on the blue car, which I would assume is the part number I'm struggling with?

[AudiQuattros]

Are these the factory 200/v8 rear calipers? I'm struggling with part numbers.

It looks like you can use either the factory caliper or the ones that are shown on the blue car, which I would assume is the part number I'm struggling with?

310mm go under native caliper (audi 20020v / v8 / s4 / s6 / a8 / s8,1998)! 330mm caliper which go under the number I have.

[Juizer]

Thanks for this.
I need to do the 310mm rears soonish.

[ringbearer]

I just fit a b5S4 rear brake upgrade kit from Apikol on my S4. 300mm B6/B7 S4 rear rotors, B5S4 carriers (to clear the 32mm wide rotor better), B5S4 pads and a 12mm spacer to center the carrier.Using OE UrS4 rear calipers.

[ringbearer]

Pics

20150310_151549 by ringbearer93, on Flickr

20150310_151659 by ringbearer93, on Flickr

20150310_151928 by ringbearer93, on Flickr

Just ordered longer fasteners and 1" round steel to fab up some proper spacers. The washers were just for mock up and I didn't have long enough bolts to put all the washers between the knuckle and the bracket.
Not too much pad overhang either.