Jim's 07K 84 Super HX40 4kq. RIP. carnage pics :-(

[ads]

Looking awesome man, I wish 07k swaps were being developed before I started accumulating parts for my 20vt swap, these photos make green with envy

[chaloux]

You can always sell it and start again. Just wait until hank is done with dad's build okay? LOL

[EDIGREG]

damn dude, lookin good. nice progress

[Bische]

its an old diesel truck garret housing machine to accept the super 40 CHRA

Ahh I see.

OH, power goals. lets talk about that some. My initial goal is to hit 400-450 whp around 18-20 lbs. given my old dyno graph with the AAN and several factors at the time of dyno that should be easy. Heres a few problems it had, and a short history of the AAN becoming "history" for this car.
312 whp at 18 lbs(super hx40)

Sounds like a good goal, I am assuming E85 with those numbers?

Hope you get it fired up soon, good job

[glibobbo21]

No e85 in nh :-(

[Zerb]

You guys have a source for those aluminum 90s you used to make the throttle body transition for the intake manifold that isn't Wagner metal at $70 a pop?

[alxdgr8]

You guys have a source for those aluminum 90s you used to make the throttle body transition for the intake manifold that isn't Wagner metal at $70 a pop?

Anything here close? They also have some transition cones in 6061
http://www.mandrel-bends.com/catalog/mandrel-bends-34/

I've ordered some stuff from them before and it's good quality.

[Toph]

http://racepartsolutions.com/index.php/component/customfilters/mandrel-bends-tubing/no-manuf?Itemid=564

[glibobbo21]

mine was 3.5 and i think it came from "mandrel bends"

[Zerb]

The stuff I see on mandrel bends is only 16 gauge. That's too thin no? 16 gauge is like intercooler piping wall thickness I thought.

[Toph]

http://racepartsolutions.com/index.php/categories1/race/mandrel-bends/3-50-aluminum-180-mandrel-bend-pn-3-5011-ua-jod-race-part-solutions they have .110 wall

[my2000apb]

well...

[chaloux]

well...

[Hank]

Pickup tubes in progress this weekend!@!! Getting close buddy.

[glibobbo21]

[Toph]

This is exciting news, I can't wait to see this beast in action.

[my2000apb]

Pickup tubes in progress this weekend!@!! Getting close buddy.

!!!!!!!! YAY

[Hank]

Can you post some pictures of your oil pump? I need to make sure this pickup is going to work with it.

Hank

[Zerb]

any reason you guys opted to use the blue circled bosses for engine mounts versus the red ones? i know the reds would be a bit tighter....especially with the way you made your manifold versus the way hank has his...but is that the only real reason? just curious.

[audidub]

The mount brackets are actually made by hank.

[Zerb]

The mount brackets are actually made by hank.

Unfortunately that doesn't much answer my question. OP do you have any pictures of the passenger motor mount in relation to the exhaust manifold?


Sent from my iPad using Tapatalk

[Mcstiff]

[glibobbo21]

It runs. April fools. har har. Waiting for an april fools package in my mail from hank!

[chaloux]

Lol damn you Jim. At least you didn't leave us hanging for a while

[my2000apb]

(needs certain parts for Carlisle)