Hersh Performance and Racing Products - Epic Motor Mounts

AngryTaco · Post by **AngryTaco** » Mon Jul 08, 2013 4:30 pm

If you were to send me just the bushing (s) thats all I would need. I think I have the dimensions already but those might be for something else. I thought they were from the 200 20v but that is still a t44 setup if I remember correctly

AngryTaco · Post by **AngryTaco** » Tue Jul 09, 2013 12:17 am

Test fitted the mounts tonight and they are perfect! I can start production immediately. Sending out requests and invoices to those interested parties. There will be a will a 1/4" polyurethane spacer/cushion under the plate. Let the awesome mounts begin!

You'll also notice I decided to add a stiffener to the sides. This will keep everything from moving outside of tolerances while under a load

85oceanic · Post by **85oceanic** » Tue Jul 09, 2013 11:32 am

Woot! Those look great man!

AngryTaco · Post by **AngryTaco** » Tue Jul 09, 2013 2:26 pm

Small chassis subframe bushings ready to be produced! Hoping to get some preorders to help offset my first run. $125 per CAR. Thats $12 less than 034. Will fit URq / 4000 / 80 / 90 / CQ. Price is plus shipping.

They are 6061 aluminum. I can sell enough for one subframe as well. $65 per subframe or $125 per car

AngryTaco · Post by **AngryTaco** » Thu Jul 11, 2013 12:16 am

Pre order special updated under small chassis subframe bushings. Need 5 paid orders to get the ball rolling

90quattrocoupe · Post by **90quattrocoupe** » Fri Jul 12, 2013 12:28 pm

10mm or 12mm?

Greg W.

AngryTaco · Post by **AngryTaco** » Fri Jul 12, 2013 4:37 pm

Since they are aluminum, I can have it done either way. Just specify wheb ordering

AngryTaco · Post by **AngryTaco** » Sun Jul 14, 2013 11:32 am

Invoices have been sent out and awaiting payments. Plates will be made early this week and everyone should have theirs next week

AngryTaco · Post by **AngryTaco** » Tue Jul 16, 2013 5:37 pm

Mounts are in production! Super awesome epic pictures to follow completed retail mounts!

AngryTaco · Post by **AngryTaco** » Thu Jul 18, 2013 12:12 am

How many people here would like replacement reflector lenses that go on the bumper as well as replacement turn signal lenses?

I think I have found my method of recreating them and I will be developing them over a weekend when I get the time. Maybe even this weekend

Rocket SLC · Post by **Rocket SLC** » Thu Jul 18, 2013 1:05 pm

I 'm looking forward to trying these out. Keep up the good work Mr. Hersh!

Colin2750 · Post by **Colin2750** » Fri Jul 19, 2013 4:45 pm

Need any more testers for motor mounts? I need some baaaaad and these look tits! :drool:

AngryTaco · Post by **AngryTaco** » Sat Jul 20, 2013 11:36 am

Colin, I'll send you a PM in a few once work slows down a bit

Edit: You have PM Colin

AngryTaco · Post by **AngryTaco** » Tue Jul 23, 2013 7:53 pm

ATTN:

Currently working on replacement bumper reflectors and fiberglass reinforced silicon michelan man hose.

Also slowly working on replacement polyurethane upper strut mounts for small chassis and other vehicles that use them.

Stay tuned.

DE80q · Post by **DE80q** » Wed Jul 24, 2013 8:19 am

Um, this grew quickly! Glad to see others are interested. Keep me informed on the mounts.

AngryTaco · Post by **AngryTaco** » Wed Jul 24, 2013 2:23 pm

First Motor Mount Plates run is complete! I have 1 more pair for anyone wanting a set.

AngryTaco · Post by **AngryTaco** » Thu Jul 25, 2013 12:13 am

First run all welded up. Being dropped off at powdercoater on Monday.

AngryTaco · Post by **AngryTaco** » Mon Jul 29, 2013 5:32 pm

Mounts are currently at powdercoat shop and I am awaiting my polyurethane to arrive. Everyone should see their mounts hopefully within 10-14 days .

On a side note, I am pleased to announce that I am now a provider of super high quality fiberglass reinforced silicon hoses for both intake and radiator hoses. These are of extremely high quality and well tested. I run them on my own personal ride and are of epic proportions!

20VAvant · Post by **20VAvant** » Tue Jul 30, 2013 4:12 pm

Are those welds done with a MIG gun? If so, rather impressive. Excited to get mine!

AngryTaco · Post by **AngryTaco** » Tue Jul 30, 2013 5:52 pm

20VAvant wrote:Are those welds done with a MIG gun? If so, rather impressive. Excited to get mine!

They sure are. Not all were perfect, but still better than I expected them to look

AngryTaco · Post by **AngryTaco** » Wed Jul 31, 2013 12:52 am

I would really appreciate any feedback on the website. Also, be sure to like the business on facebook!

https://www.facebook.com/hershperformanceandracing

AngryTaco · Post by **AngryTaco** » Wed Jul 31, 2013 9:40 pm

If anyone needs intake hoses for their custom setups, please let me know before Friday so I can have them ready to ship next week.

These are 2-ply FIBERGLASS reinforced! They have an operating temp of -65F up to 600*F. These are extremely high quality and will hold over 100 psi of pressure. These are not your average ebay hoses and couplers!

my2000apb · Post by **my2000apb** » Sun Aug 04, 2013 10:44 am

hey jared, just a thought for you, hump hoses @ angle, ive never seen any before, but say a 15 and 30 degree version, more abrubt angled couplers seem to deflect better. so a hump hose with just a bit of angled offset would be TITS!!!

AngryTaco · Post by **AngryTaco** » Sun Aug 04, 2013 2:40 pm

Thats an excellent idea Tim. When I go to pick up my inventory this week from the manufacturer, I'll run that by them and see what they say. The straight one like in the picture is good for up to a 10-degree offset

AngryTaco · Post by **AngryTaco** » Mon Aug 05, 2013 11:23 pm

Picking up powdercoated mounts tomorrow!! Pictures soon! All thats left is for the polyurethabe to arrive!!

Hersh Performance and Racing Products - Epic Motor Mounts

Re: Hersh Performance and Racing Products -- WEBSITE ONLINE!

Re: Hersh Performance and Racing Products -- WEBSITE ONLINE!

Re: Hersh Performance and Racing Products -- WEBSITE ONLINE!

Re: Hersh Performance and Racing Products -- WEBSITE ONLINE!

Re: Hersh Performance and Racing Products --Last call for pr

Re: Hersh Performance and Racing Products --Last call for pr

Re: Hersh Performance and Racing Products --Last call for pr

Re: Hersh Performance and Racing Products --Last call for pr

Re: Hersh Performance and Racing Products --Last call for pr

Re: Hersh Performance and Racing Products --Last call for pr

Re: Hersh Performance and Racing Products --Last call for pr

Re: Hersh Performance and Racing Products --Last call for pr

Re: Hersh Performance and Racing Products --Last call for pr

Re: Hersh Performance and Racing Products --Last call for pr

Re: Hersh Performance and Racing Products --Last call for pr

Re: Hersh Performance and Racing Products --Last call for pr

Re: Hersh Performance and Racing Products --Last call for pr

Re: Hersh Performance and Racing Products -- Pictures!

Re: Hersh Performance and Racing Products -- Pictures!

Re: Hersh Performance and Racing Products -- Pictures!

Re: Hersh Performance and Racing Products -- Pictures!

Re: Hersh Performance and Racing Products -- Pictures!

Re: Hersh Performance and Racing Products -- Pictures!

Re: Hersh Performance and Racing Products -- Pictures!

Re: Hersh Performance and Racing Products -- Pictures!