DomP90 Coupe Quattro

[DomP90]

Whats up guys, just thought I'd finally start a project thread on my very long and slow project so far. I picked up a non-running 1990 Coupe Quattro from a buddy with the sole intention of stripping and rebuilding it. So far the plan is built 20vt, PTE 5858 turbo and 01e 6-speed for the drivetrain.

So far I have:
-83mm 8.5:1 JE pistons
-Scat rods
-PTE 5858 billet compressor wheel, ceramic ball bearing turbo
-ARP Headstuds
-ARP Main studs
-034 coated rod and main bearings
-Wagner Tuning intake manifold

And many other little odds and ends. I'm waiting on my Iroz Motorsport equal length header and matching downpipe right now. Originally I had a Wagner Tuning high flow RS2 manifold but ended up selling that for an Iroz piece. Can't wait till I get it!

Next step is to send out the bottom end to the machine shop and assemble it. I'll be getting a full Ferrea valvetrain soon and sending the head out to get redone as well. Hopefully I'll be able to keep you guys updated quite often, but it's tough between work and school.

And since I know you guys love pics

The car


The engine parts


The Snail


Wagner Intake mani


Boxster S 4-pots


S2 rear bumper


RS2 Ellipsoids


Hope you guys enjoy! Any advice, tips or comments are more than welcome!

-Dom

[Hank]

Nice Dom, I can't wait to see this materialize into awd drifts. It is going to be a beast.

[85oceanic]

Judging by the parts you have, it looks like it's going to be one heck of a fun ride!

[DomP90]

I hope so! haha. I'm trying to build it right the first time that way I can enjoy the car when its done without worrying too much.

[Hank]

Hopefully this can tie you over till I finish it up on tuesday!

[DomP90]

Hank, you are the man! Can't wait to see it up close in person!

[amd is the best]

Nice build! 5858 should be awesome

[SmokeTheRear]

Build looks dope.

[DomP90]

Finally got the name of the guy that machined my friends motor in his 1100whp vette, so I should be dropping off the motor soon. Gonna order the valvetrain parts this week hopefully and then the head will go out to hank for some minor work. Progress to be made soon hopefully!

[chaloux]

This should be fun! Wait till you get hank's manifold. It's... AMAZING

[DomP90]

Finally decided to do some work. Started taking apart the head prepping it to get refreshed with all new Ferrea goodies

[DomP90]

Little update from Hank


Also Ferrea stuff has been ordered. Should be in any day now. 0.5mm oversized exhaust and intake valves, valve springs, spring seats, titanium retainers and valve locks.

[jersey90tq]

Nice work Dom!

How is the 90?

[DomP90]

The 90 is the 90, low, stiff, uncomfortable. You know the deal haha

[SmokeTheRear]

And broken......

[DomP90]

And the jewelry is in!

Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

[mushasho]

Having parts arrive is the best feeling....

Sent from my KFTT using Tapatalk HD

[chaloux]

Having parts arrive is the best feeling....

Sent from my KFTT using Tapatalk HD

I think the first start and/or driving it are better... haha

[DomP90]

First start is still a long ways away so ill settle for the new parts feeling... which I got to experience again today! Manifold and downpipe have finally arrived. The quality of Hanks work is out of this world, so happy I got rid of my wagner for this. Next step is to get the head and bottom end machined. Head will be going out to Hank and the bottom end ill have done by one of the many good local machine shops. Also moving into a new garage so its time to start getting my hands dirty again instead of just spending money.



Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

[Hank]

nice. i think we have some pictures on the jig stand in the office. ill look tomorrow

[Hank]

Thanks for the Business Dom.

[DomP90]

Thanks for the pics Hank! Such a tease looking at everything mocked up knowing im nowhere near seeing everything together yet. haha

[DomP90]

Minor update. Car is in a new garage. Much more space to myself now. Got the dash out tonight. Now to start sifting through the wiring to get the engine harness out to make room for the VEMS setup im going to get.

Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

[Hank]

Booo, I thought this was the first start post

[Kuma]

Omg, dat weld.