FS: $4,500 Casey's 200 20v

[WOMBAT]

Back in VT and life is 24x better!

I cleaned up the shop a bit and decided to layout some of the goods for a picture... excuse the cell phone pics


And am in the middle of a small detail sort of project wherein I am attaching some A6 gauge cluster bezels that add a touch I feel to the 200's boring cluster. Here are a couple in progress shots:

Removing the mounting tabs (made to lock into the A6 cluster, 200 cluster does not have provisions for these)


Glued in place


That's all for now, stay tuned....

[WOMBAT]

Today I finished installing the gauge bezels and reinstalled the cluster into the 200. Also took a little time give the front half of the car a wash since it still has the salt/grime on it from being towed up to VT last January. I then cleaned up the engine block a bit, scraping off gasket remnants and flaking areas on the outside to prep it for media blast before heading off to get an acid dip and hone.








Quick wash...




And the block

[loxxrider]

nice, I love it and am especially jealous of your nardy

[nuugen]

I did the same with those rings, with the S4 white gauge faces, looks really sweet..I cut the notches into the back of the 200 cluster so that they lock in..Gluing them in definitely would have been way easier!
What are you doing to the block?

[AudiSport4000]

Looks great Casey, nice work

[loxxrider]

"what are you doing to the block?"

from the looks of it, I'd say SCAT rods going in

[WOMBAT]

Oh yes, full build I have the goods, just need to prep the block and assemble... And save for an ems

[WOMBAT]

I did the same with those rings, with the S4 white gauge faces, looks really sweet..I cut the notches into the back of the 200 cluster so that they lock in..Gluing them in definitely would have been way easier!
What are you doing to the block?

Either way its a pain.. It took far too much time to cut all of the tabs off the rings, but the result is definitely worth it

[32vquattro]

looking real good (even if it is missing 3 cylinders )

[WOMBAT]

looking real good (even if it is missing 3 cylinders )

Haha thanks man! I do miss the V8 but it's parked a car over from the 200 so I get to see it on a daily basis

[WOMBAT]

Just a quick update before getting back to wedding stuff - getting married this Saturday 8)

scraped, wire brushed, honed, degreased, power washed, soap n' water, power washed, dried, oiled cylinders/mains lightly, masked off the block, primed and top coated. The color was a ppg in a can I had left over... not a preferred color, but is darker than the pictures make it out to be and is a metal flake gray.

[Hank]

Congrats!!!! Best wishes!

[loxxrider]

nice good luck casey

[jcarrick]

Looking good man! What intercooler is that?

[WOMBAT]

Thanks everyone!
That IC, like my exhaust mani, is an ebay POS... I'll use it for the time being, but there's enough test data out there to convince me I need a real core. That'll happen sometime much later though since I don't anticipate any track use; especially with my wheel/tire setup.

[jcarrick]

Thats what i figured. But ive heard of many cars with 800-1000hp running those intercoolers with no problmes... Im gonna try one on my build as well

[WOMBAT]

Picking these up super cheap on the way to my wedding (no im not spending money, I gave some parts to a friend and he's getting them for me) We'll see what it takes to fit them and then recondition/redye them. They're sport seats from a 1991 Corvette.

[Dan McBoost]

Project is looking great Casey!

So... what's under the cover in the middle of the two audis?

[WOMBAT]

That's a Black 1993 MR2 turbo...very clean

[derracuda]

hmm, interesting seat idea. make sure to weigh them for comparison

[WOMBAT]

hmm, interesting seat idea. make sure to weigh them for comparison

Will do - went looking for them a couple years ago on a recommendation from an audi/corvette owner friend who kept talking about the support and comfort of these seats and that they're featherweights compared to the audi seats.

I hope I can get them to fit at the right position in the audi..

[derracuda]

you made the v8 bumper work... i think you can manage the seats . just make sure that if they are fixed-mounted, that they are anchored properly, or properly adapted to stock mounts. so at least if you get in a crash, the seat will hold you in the car as intended.

[WOMBAT]

you made the v8 bumper work... i think you can manage the seats . just make sure that if they are fixed-mounted, that they are anchored properly, or properly adapted to stock mounts. so at least if you get in a crash, the seat will hold you in the car as intended.

That's my main concern. I'm hoping to securely mount (weld) the vette seat base to the audi seat frame and wire up the controls to maintain the forward/back movement. I'll document it well!

[apavlov13]

Ambitious!

[WOMBAT]

I seem to have misplaced my wrist pins.... anyone know where I can find some? I recall being told they were NLA :(