FS: $4,500 Casey's 200 20v

loxxrider · Post by **loxxrider** » Tue Jul 28, 2009 2:33 pm

Are you going to paint the bottom lip?

In my opinion thats what really sets that look off!

3B'dB3 · Post by **3B'dB3** » Tue Jul 28, 2009 4:32 pm

I found another pic of your car from WF!

http://www.vwvortex.com/gallery/gallery ... ellaneous#

second from the left. :-D

Good to hear you got your hands on a bumper thats the correct color!

its gonna be the best thing you ever did! no looking back man! 8)

WOMBAT · Post by **WOMBAT** » Tue Jul 28, 2009 5:30 pm

loxxrider wrote:Are you going to paint the bottom lip?

In my opinion thats what really sets that look off!

you bet! going to either cut the lower grill out too or paint it black so that it doesn't stand out like it does now..... I also want to get a V8 rear bumper mounted up to balance the skirting front to back and I'll paint the lower part of that as well. Lots to be done!

And yea, it's definitely staying pearl white!

And it makes me giddy seeing pictures of my car that I didn't take for once - thanks for the link!

3B'dB3 · Post by **3B'dB3** » Tue Jul 28, 2009 6:20 pm

It would get my excited too man!

ive been thinking about it...paint matched DTM V8 Spoiler?

Attachment ( 17861 ) : Carlisle2007_025_sized.jpg

WOMBAT · Post by **WOMBAT** » Tue Jul 28, 2009 6:23 pm

yea, was thinking about it today. Leaning away from it - but they do look good

3B'dB3 · Post by **3B'dB3** » Tue Jul 28, 2009 7:10 pm

doesnt hurt my feelings at all, Im not sure how it would change the look.
kinda batmobile-ish almost..

nuugen · Post by **nuugen** » Tue Jul 28, 2009 7:31 pm

WOMBAT wrote:Nothing really to report today, just took the license plate bracket off and cleaned up the bumper.........on hold 'till the fender mounting brackets show up.

More pics because there are never enough!

Hawt Casey!! I have always loved the look of the V8 bump with the 200 headlights/grille..
Only thing I would change is cut off that tow hook..If you really want one retrofit the screw-in type from the V8..
And I am trying to come up with a side-skirt solution--the rockers on a V8 are deeper to match the deeper bumpers, and once you hang them on 1 two hun' the side view becomes awkward...

nuugen · Post by **nuugen** » Tue Jul 28, 2009 7:34 pm

I have another q? WHY did Audi put those little "tits" on the bottom of the molding :? :frustrated: I am going to grind mine off(since I have many sets of them) to make it sit flush on top of the bumps..

loxxrider · Post by **loxxrider** » Tue Jul 28, 2009 8:00 pm

WOMBAT wrote:
loxxrider wrote:Are you going to paint the bottom lip?

In my opinion thats what really sets that look off!

you bet! going to either cut the lower grill out too or paint it black so that it doesn't stand out like it does now..... I also want to get a V8 rear bumper mounted up to balance the skirting front to back and I'll paint the lower part of that as well. Lots to be done!

And yea, it's definitely staying pearl white!

And it makes me giddy seeing pictures of my car that I didn't take for once - thanks for the link!

'

awesome...that is EXACTLY what I have in mind for mine.

Didn't get a chance to go to the junkyard today, but I did call and they said I could have it for $38 lol Ill just have to remember to take the lights, struts, and fender clip things with me I guess?

derrish_vulf · Post by **derrish_vulf** » Tue Jul 28, 2009 8:28 pm

man v8 bumps with 200 headlights/grille look SO perfect!!!

I found a place local that has both front and rears, and they also buy from where i work so i get a nice discount. Im thinking about picking em up now!!

WOMBAT · Post by **WOMBAT** » Wed Jul 29, 2009 3:34 am

nuugen wrote:
WOMBAT wrote:Hawt Casey!! I have always loved the look of the V8 bump with the 200 headlights/grille..
Only thing I would change is cut off that tow hook..If you really want one retrofit the screw-in type from the V8..
And I am trying to come up with a side-skirt solution--the rockers on a V8 are deeper to match the deeper bumpers, and once you hang them on 1 two hun' the side view becomes awkward...

I was thinking about painting this tow hook black and removing the lower grill to make my own, but I would certainly prefer the screw-in type hook. As for side skirts, the car will be hurting for some especially if I get the rear bumper on there too.

I have another q? WHY did Audi put those little "tits" on the bottom of the molding Confused Frustrated I am going to grind mine off(since I have many sets of them) to make it sit flush on top of the bumps..

just because they wanted them to get stuck on the V8 bumper if anyone tried to do the swap

WOMBAT · Post by **WOMBAT** » Wed Jul 29, 2009 3:37 am

loxxrider wrote:
WOMBAT wrote:
loxxrider wrote:Are you going to paint the bottom lip?

In my opinion thats what really sets that look off!

you bet! going to either cut the lower grill out too or paint it black so that it doesn't stand out like it does now..... I also want to get a V8 rear bumper mounted up to balance the skirting front to back and I'll paint the lower part of that as well. Lots to be done!

And yea, it's definitely staying pearl white!

And it makes me giddy seeing pictures of my car that I didn't take for once - thanks for the link!
'

awesome...that is EXACTLY what I have in mind for mine.

Didn't get a chance to go to the junkyard today, but I did call and they said I could have it for $38 lol Ill just have to remember to take the lights, struts, and fender clip things with me I guess?

man. that's dirt cheap, go for it! and yea, pick that stuff up too! Also pick up the plugs for the fogs and signals in the bumper for a cleaner install

88Quattro · Post by **88Quattro** » Wed Jul 29, 2009 3:40 am

dude that front end looks TOP DAWG DOOOO ITTTT !!!!

WOMBAT · Post by **WOMBAT** » Wed Jul 29, 2009 9:52 am

Quick update - bumper brackets showed up before lunch today so I checked them quick - won't be a bolt up jobbie, so stay tuned for some mish-mash of V8 and 200 bumper brackets put together

bimmerboy · Post by **bimmerboy** » Wed Jul 29, 2009 12:43 pm

And here comes a raise in v8 bumper prices

But does anyone know how the bumper would match up with non flared typ 44s? (aka us poor 20vt folks)

WOMBAT · Post by **WOMBAT** » Wed Jul 29, 2009 12:48 pm

we'll see what happens with the home-made bracketry (new word) but the edges of the bumper can be pulled all the way in so that it's uniform with the chrome trim by the wheel well

all pictures thus far are w/o the sides of the bumper attached in any way

nuugen · Post by **nuugen** » Wed Jul 29, 2009 1:19 pm

Yes the bottom of the V8 fenders differs from the 200's in a way that impedes the use of the V8 side brackets..

WOMBAT · Post by **WOMBAT** » Wed Jul 29, 2009 4:34 pm

Made some progress with fender brackets. A quick trial of the V8 bracket made it clear that it could not be used as it was. The first thing that made sense to me was to cut the bracket in half, so out came the saws-all. Here's the 200 vs V8 bumper mounting types.

to mount these half brackets I slid them onto the bumper, put the bumper on the car and marked with painters tape where the mount was located. I also looked between the chrome trim with a flashlight to get an idea as to where the mount was to go vertically.

Once I had idea of where it needed to go, I marked a line above the mount where I thought was the correct location and then put the mount and bumper back on the car to check the mount's position relative to the mark I made.

When I was confident in the location, I drilled 2 7/64"pilot holes for some sheet metal screws and attached the brackets.

(Driver's side)

Passenger Side

The following pics show the fitment.

I then spent a stupid amount of time trying to bolt the bumper onto the car with no success. I was able to drill all 6 holes in the struts in just the wrong spot so that none of them line up :frustrated: this again helps me with the clean install though because I'll finally look into putting the V8 strut end on the 200 strut which may allow me to have the bumper in the right spot and still have functioning struts.

If all else fails, I'll break out the steel and make some rigid struts. At some point I'll start looking into ways of getting the corners of the bumper to pull in, perhaps using the existing slots near the top corners of the bumper. Stay tuned....

noriceforyou · Post by **noriceforyou** » Wed Jul 29, 2009 8:23 pm

Oh man soooo nice! Bloody cars should have come like that from the factory

derrish_vulf · Post by **derrish_vulf** » Wed Jul 29, 2009 10:54 pm

WOW!! Lookin awesome man!!

BloodRed · Post by **BloodRed** » Thu Jul 30, 2009 11:35 am

Alright....I've added a V8 bumper and flared fenders to my to do list.....In the new "spend more on the body than I paid for the car" section...

Just sexy. :drool:

WOMBAT · Post by **WOMBAT** » Thu Jul 30, 2009 2:53 pm

Nearly complete on this project! Today I decided to scrap the V8 bumper struts since everything about making them fit was ghetto at best. I decided with the welcomed influence of the 'geek community to make some struts out of the 200 and V8 pieces. Here's what we have:

First I cut off the mounting brackets on the 200 struts and cleaned them up

Next up was cutting the V8 struts. The 200 struts as they stand are too short to just weld the V8 bracket up. Before taking the V8 struts and bumper off of the car, I measured the distance between the frame rail and the end of the V8 bracket. I found that I needed 5/8" additional strut added onto the 200 strut, so I made my cut with 5/8" strut still attached.

Here's the result - no welder here, so I'll have to do it at work tomorrow unless there's someone in the Utica, NY area that can help 8)

Till then, I need to lengthen the turn signal wires so that they reach their new location. Once the struts are welded up, I should be good to go other than pulling the corners by the wheel well inward for a better finished product.

derrish_vulf · Post by **derrish_vulf** » Thu Jul 30, 2009 4:43 pm

Next up, REAR V8 bumper

WOMBAT · Post by **WOMBAT** » Thu Jul 30, 2009 4:59 pm

truth.

siena · Post by **siena** » Thu Jul 30, 2009 11:06 pm

Personally, to make it flow better, I'd be inclined to use V8 fenders, and make the angle match the 200 headlamps, even if it means grafting the 200 fender tips to the V8 ones.

At least, the V8 fender flares will be a 100% match for the bumper then...