Jim Green's 90q 20vt - 636whp 07k

Document and share your build!
honky

Post by honky »

Is that exaust street legal?
cuatrokoop

Post by cuatrokoop »

honky wrote:Is that exaust street legal?


Depends...I thought I remembered reading were some States had regulations that they had to exit either behind the rear axle or behind the passenger compartment. OEM's were excluded, think F150 Lightning and Viper R/T-10.
JShadzi

Post by JShadzi »

honky wrote:Is that exaust street legal?


This is probably the least of his worries.
User avatar
audifreakjim
Posts: 2142
Joined: Sun Mar 03, 2013 3:00 pm

Post by audifreakjim »

I've never had a problem in CO with it, the emissions guys get a little pissy because they have to monkey with it on the dyno.
pkw

Post by pkw »

hey jim let us know how cam timing changes work out for you on the dyno if you would? man, i looked at the specs and the stock cams seem kind of advanced already i wonder if there will be any usable gain by advancing them more. i would guess that if you wanted more top end that would come pretty easy though by retarding, but just speculation without the dyno info. i was going to run mine about 6 degrees advanced because of my severe block decking but after looking at the cam specs i could not bring myself to running it that way.
PRA4WX
Posts: 589
Joined: Sun Mar 03, 2013 2:10 pm

Post by PRA4WX »

audifreakjim wrote:We ususally ski Copper or Vail and try to stay up there at least one night to get away from traffic.
Yeah, lot of idiots driving on 70 in the mtns, mostly from Texas it would seem to me! :P
User avatar
audifreakjim
Posts: 2142
Joined: Sun Mar 03, 2013 3:00 pm

Post by audifreakjim »

Will do, I plan on doing back to back runs after the changes so we'll see!
User avatar
audifreakjim
Posts: 2142
Joined: Sun Mar 03, 2013 3:00 pm

Post by audifreakjim »

UPDATE!!!!

OMFG, I just found a real, solid 29 peak, 27 sustained psi of boost. I've been fighting to get the thing above 22 psi relaibly, and thought it was the POS ignition cables I re-used. Nope, I had too much plug gap. I was running .033, knocked it down to .027 and watch out! (Javad I still need those plug wires though :wink: )

I got about three solid 2nd gear runs and one in third. I've never been in a car this fast, it's fvcking retarded!

Unfortunatly the fun ended when I just had to taste it once more. I was just rolling in second, hit the gas, boost built, then snap! I thought I broke a driveshaft, but it's something internal in the tranny. It's been getting noisy at idle lately, now it's really noisy! I was able to limp home ~1.5 miles in 1st slipping the clutch the whole way.

Here's the noise. It's a from a camera phone.
http://mswanson.com/~jgreen/videos/clank.3gp

Obviously I'm still a little giddy from the new found power.

Sooooo, anyone in Denver have a 4kq 016 they want to get rid of? I'm going to try and grease the guy at the muffler store down the street to let me use the lift at night. I'm hoping I can get it done by next weekend, but it's looking bad for the dyno and auto-x.
noriceforyou

Post by noriceforyou »

holy hot snap, another busted tranny :) Excellent work Jim! (it's funny how car nerds congratulate each other for breaking things) :woowoo:
JShadzi

Post by JShadzi »

Nice buddy! What gear? What plugs are you running? How much Dwell?
User avatar
audifreakjim
Posts: 2142
Joined: Sun Mar 03, 2013 3:00 pm

Post by audifreakjim »

I think I still have all gears, once the car started moving again in 1st I just left it there and headed home. I'm running NGK 7 heat range plugs, standard issue for the 3B. I think dwell is 3 ms with the multiplier set at 2 for this boost range. What gap are you running?

It may be a while before I get a real good look at it, with St Patty's day and my 30th birthday this weekend, there's lots of other things I need to focus on. :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers:

and also

:cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers:
JShadzi

Post by JShadzi »

Nice, 30 is a good one, congrats! :cheers:

We're all (80tq, Stroker Coupe, etc) running the F6DTC's with the 1.0mmm gap, about 7MS Dwell under boost, smooth like butter ;)
SEStone
Posts: 430
Joined: Wed Feb 27, 2013 9:45 pm
Location: Redmond, WA
Contact:

Post by SEStone »

Congrats on the transmission and happy birthday! It's looking like my Spring break trip isn't going to happen sadly, so I can celebrate the stupid amount of power you're making without sadness :-D .

Sam
Sam Stone
PRA4WX
Posts: 589
Joined: Sun Mar 03, 2013 2:10 pm

Post by PRA4WX »

Congrats on the transmission Jim! Really nice work. i am going to be back home the last week of the month. So i will be in the front range! i'd love to meet your car.....i mean you too! :P
Derracuda
Posts: 264
Joined: Wed Feb 27, 2013 5:22 pm

Post by Derracuda »

:bashtard:
pkw

Post by pkw »

gotta get it fixed in time for the dyno.
User avatar
Marc
Posts: 1586
Joined: Wed Feb 27, 2013 1:33 pm

Post by Marc »

happy 30th Jim!

Celebrate by drinking and watching audi stomp Sebring. From the short sound clips of the R10 those things should be fun to watch!
Marc Swanson
Proprietor, EFI Motorsport
User avatar
Audilard
Posts: 1253
Joined: Wed Feb 27, 2013 3:00 pm
Location: Draper, UT

Post by Audilard »

Buy yourself a new tranny for your birthday Jim!! :wink:
Darin
1989 80 20vt
Shawn M.

Post by Shawn M. »

happy b-day
quattro87
Posts: 1000
Joined: Wed Feb 27, 2013 2:06 pm

Post by quattro87 »

Another tranny OWNED! Nice work Jim and happy b-day.
RSCoupe
Posts: 217
Joined: Sun Mar 03, 2013 4:31 pm

Post by RSCoupe »

Happy birthday Jim! :cheers: :cheers: :cheers:
I think a nice present to yourself would be a 6-speed from a B5 S4. I mean, you only turn 30 once. Except for me, I've turned 29 10 times. :-D
Mark Siggelkow
'90 CQ-R - NASA GTS-4
'12 TT-RS (Wife's DD)
'00 A4 1.8TQ (My DD)
'62 356B (vintage racer)
'07 Toyota Tundra CrewMax (for towing/hauling)
pkw

Post by pkw »

anybody have "farmer ted" singing.... you say its your birthday na na na na na na na na...sorry, it was on the other day.
User avatar
audifreakjim
Posts: 2142
Joined: Sun Mar 03, 2013 3:00 pm

Post by audifreakjim »

RSCoupe wrote:Happy birthday Jim! :cheers: :cheers: :cheers:
I think a nice present to yourself would be a 6-speed from a B5 S4. I mean, you only turn 30 once. Except for me, I've turned 29 10 times. :-D


LOL, the 550 hp motor that eats trannys was my birthday present.
zepmoreau

Post by zepmoreau »

Well Jim, I'm quite proud!! U r doing what I expected. Today is my birthday and I am sending you the wish (with margarita and irish beer buzz) to have it to its limit. Looks like you hit one limit bound to be overcome!!! I'm not able to make my boston F1 trip because of work but am happy seeing the post none the less!!!

I understand you are looking for an 4k 016.... last resort i have a 5ktq 016. Let me know if you need it :wink:

u make me proud. I hope I make u proud with a 500 whp 5ktq avant :-D
dustin4kq

Post by dustin4kq »

I saw a 4kq at pullnsave in aurora, I'm headed there tomorrow ill check it out if you'd like. I don't think it would be to expensive. Id help you pull it if you give me a ride when its back in:) I have a an 84 4kq tranny but it started whining a little before I swaped it out.
Post Reply